How can I unlock my Unagi scooter?

Models
1

Hey guys, we borrowed two Unagi scooters from our cousin. When we try to start them, we see a red lock screen and hear a beeping sound all the time. We’ve searched online but can’t find any solutions. Can you help us out?

1 Like
2

If your Unagi scooter is displaying a red lock screen and emitting a beeping sound, it’s likely in a locked state. Here’s how you can unlock it:

  1. Ensure the scooter is fully charged.
  2. Press and hold both the accelerator (throttle) and brake levers simultaneously.
  3. While holding down the levers, press the power button rapidly ten times.
  4. Listen for an audible beep, indicating the scooter is unlocked.
  5. Test the scooter to ensure the lock screen disappears.

If the issue persists, check the scooter’s battery level and recharge if necessary. Always adhere to local regulations when riding. Enjoy your ride!

3

To unlock the speed cap, turn on the scooter and hold both the hand brake and throttle. While holding them, press the power button 10 times. You’ll hear two beeps, indicating that the speed cap is now unlocked.

4

It sounds like the Unagi scooters you’ve borrowed are locked and the beeping sound is an indication of this. Here are a few steps you can try to unlock the scooters:

Check the Unagi FAQ: Visit the Unagi Scooters FAQ page for guidance on using the scooter and troubleshooting common issues.
Uninstall and Reinstall the App: Some users have resolved the red lock screen and beeping issue by uninstalling and then reinstalling the Unagi app on their phone. After doing this, turn on your Bluetooth and the scooter, and then open the app and log in.
Reset the Scooter: To reset your Unagi scooter, press and hold the power button for 10-15 seconds. This can help resolve technical glitches and may unlock the scooter.

1 Like
5

Several factors can trigger the beeping alarm in electric scooters, with a low battery being a frequent cause. This alarm system alerts you when power levels are depleting. To silence the beeping, ensure the scooter’s battery is charged adequately.

1 Like
6

just like it is
To unlock the speed cap, turn on the scooter and hold both the hand brake and throttle. While holding them, press the power button 10 times. You will hear two beeps indicating it’s now unlocked.